Soundtracs consoles Soundtracs Topaz First here's an original Independant REVIEW of TOPAZ 8 / PROJECT 8 The Soundtracs Topaz Project 8 replaces the original Topaz mixer, but the changes between the two consoles are largely cosmetic. The body of the Project 8 is now a dark gray Nextel finish.
Rexel Lp35hs Laminator Manual, Sutonny Font Free Download, Apple Ipad. Calculator El-735 Manual, Bhrigu Samhita Hindi Pdf, Soundtracs Topaz 14. User Manuals, Guides and Specifications for your Peg-Perego Classico Stroller.
(Nextel resembles a 'fuzzy' paint look.) Additionally, the garish pastel knobs of the original Topaz have been replaced with dark knobs for a more professional look, and bushings have been added to the knob shafts, providing a solid feel. Other than these and a few other minor alterations, there are no major feature or performance changes between the discontinued Topaz and the new Topaz Project 8. The Project 8 is an analog 8-bus mixer designed for multitrack recording that comes in 24- and 32-channel (48- and 64-input) versions.
Because it's an in-line design, the Project 8 has two inputs (Channel and Monitor) for each channel strip. Generally, the Channel is used for recording live tracks during tracking and overdubbing and for tape tracks during mixdown. Mathtype 6 9 serial cracks free. The Monitor can be used to monitor previously recorded tape tracks (or virtual MIDI/workstation tracks) during tracking/overdubbing and for sending any other line input source to the 2-track bus during mixdown. Channel Inputs Starting from the top of the input channel, the Project 8 has a scribble strip and switches for phase reverse, phantom power, flip and bus (more on flip and bus later).
The gain pot has a 10dB to 60dB range for mic and a -20dB to 30dB range for line-level signals. The channel EQ section has a high-shelving band at 12 kHz, low-shelving at 80 Hz, and two swept-mid EQs. MF1 EQ is sweepable from 350 to 8k Hz, and the MF2 EQ is sweepable from 50 to 1k Hz. All EQ has a +/-15dB range and a center detent. EQ bypass switches are provided. A dedicated 2-band EQ devoted to the Monitor input consists of high-/low-shelving EQs (80 and 12k Hz), both with a +/-15 dB range.
The aux section uses a four-of-six arrangement, meaning that there are six aux send outputs, but only four can be used on a channel at a time. Aux 1 is a pre-fader channel send, and Aux 2 is a pre-fader monitor send; unfortunately, these cannot be switched for post-fader use.
Auxes 3 and 4 are post-fader sends and can be switched for use with either the Channel or Monitor input. Switches allow routing Aux 3 to the Aux 5 output and Aux 4 to the Aux 6 output. Connection All of the jacks, except for headphone and talkback, are located on the back of the mixer. The mic inputs are XLRs; all others are 1/4-inch phone jacks.
- Author: admin
- Category: Category
Soundtracs consoles Soundtracs Topaz First here's an original Independant REVIEW of TOPAZ 8 / PROJECT 8 The Soundtracs Topaz Project 8 replaces the original Topaz mixer, but the changes between the two consoles are largely cosmetic. The body of the Project 8 is now a dark gray Nextel finish.
Rexel Lp35hs Laminator Manual, Sutonny Font Free Download, Apple Ipad. Calculator El-735 Manual, Bhrigu Samhita Hindi Pdf, Soundtracs Topaz 14. User Manuals, Guides and Specifications for your Peg-Perego Classico Stroller.
(Nextel resembles a 'fuzzy' paint look.) Additionally, the garish pastel knobs of the original Topaz have been replaced with dark knobs for a more professional look, and bushings have been added to the knob shafts, providing a solid feel. Other than these and a few other minor alterations, there are no major feature or performance changes between the discontinued Topaz and the new Topaz Project 8. The Project 8 is an analog 8-bus mixer designed for multitrack recording that comes in 24- and 32-channel (48- and 64-input) versions.
Because it's an in-line design, the Project 8 has two inputs (Channel and Monitor) for each channel strip. Generally, the Channel is used for recording live tracks during tracking and overdubbing and for tape tracks during mixdown. Mathtype 6 9 serial cracks free. The Monitor can be used to monitor previously recorded tape tracks (or virtual MIDI/workstation tracks) during tracking/overdubbing and for sending any other line input source to the 2-track bus during mixdown. Channel Inputs Starting from the top of the input channel, the Project 8 has a scribble strip and switches for phase reverse, phantom power, flip and bus (more on flip and bus later).
The gain pot has a 10dB to 60dB range for mic and a -20dB to 30dB range for line-level signals. The channel EQ section has a high-shelving band at 12 kHz, low-shelving at 80 Hz, and two swept-mid EQs. MF1 EQ is sweepable from 350 to 8k Hz, and the MF2 EQ is sweepable from 50 to 1k Hz. All EQ has a +/-15dB range and a center detent. EQ bypass switches are provided. A dedicated 2-band EQ devoted to the Monitor input consists of high-/low-shelving EQs (80 and 12k Hz), both with a +/-15 dB range.
The aux section uses a four-of-six arrangement, meaning that there are six aux send outputs, but only four can be used on a channel at a time. Aux 1 is a pre-fader channel send, and Aux 2 is a pre-fader monitor send; unfortunately, these cannot be switched for post-fader use.
Auxes 3 and 4 are post-fader sends and can be switched for use with either the Channel or Monitor input. Switches allow routing Aux 3 to the Aux 5 output and Aux 4 to the Aux 6 output. Connection All of the jacks, except for headphone and talkback, are located on the back of the mixer. The mic inputs are XLRs; all others are 1/4-inch phone jacks.